About GaugeControl
Change the look and feel of your device, customize warning levels and change the parameters displayed. Version History Minor fixes : MoTeC M800 oil pressure scaling Water Pressure support for Link ECUs Fuel level byte...
Change the look and feel of your device, customize warning levels and change the parameters displayed.
Version History Minor fixes : MoTeC M800 oil pressure scaling Water Pressure support for Link ECUs Fuel level byte offset corrected for Link ECUs 1.58 Sep 5 Firmware 0.157 : MoTeC M800 Protocol fixes 1.57 (157) Jun 11 Added support for the new Turbo Speed gauge and expanded R32 compatibility, including R32 Skyline Clock support. New vehicle management features let you create car profiles, assign multiple devices, and add vehicle photos for easier organization. Improved multi-device handling, firmware update workflows, and config syncing reliability. Also includes better support for older devices, improved background image handling, factory config reset support, and other minor fixes. 1.54 (154) Jun 6 Support for upcoming hardware Fuel level display for Haltech ECUs Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes. Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes. Z32 Appearance. Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes. Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App: Background re-centering in app Background image delete Firmware 0.135: Better night mode hysteresis Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature *** Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen! Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 : Minor analog gauge UI bugfix. Add support for Torque Split gauge on Link Platform. Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled. Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App : Customizable "backlight" colors IOS app stability fixes Firmware: Link G4 CAN Endianness fix Link G4x/G4+ gear position fix Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes: * Cleanups to MoTeC M1 GPR/GPA CAN Stream * Cleanups to Link G4 CAN Stream Changes : Save / Disconnect button behavior changed to be distinct operations. New features : * Completely rewritten gauge display code * "3D" needle sprites for analog gauges * Two new gauge appearances : 270 degree sweep and CP9A Evo * 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN * MoTeC M1 Powertune Australia Firmware Support * ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU) Legacy Link G4 Support (beta) Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options! Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 : MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces! R32 (White) R33 (Black) S14 (White) New font for R33, matches the factory meter more accurately Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware. Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling Link vehicle speed CAN mapping R33 Clock-style speedometer MPH/KPH unit config setting Various bugfixes Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023
Previous Versions
Here you can find the changelog of GaugeControl since it was posted on our website on 2023-12-12 15:21:19.
The latest version is 1.58 and it was updated on 2026-10-15 18:40:49. See below the changes in each version.
GaugeControl version 1.58
Updated At: 2026-10-15
Changes: Version History Minor fixes :
MoTeC M800 oil pressure scaling
Water Pressure support for Link ECUs
Fuel level byte offset corrected for Link ECUs 1.58 Sep 5 Firmware 0.157 : MoTeC M800 Protocol fixes 1.57 (157) Jun 11 Added support for the new Turbo Speed gauge and expanded R32 compatibility, including R32 Skyline Clock support.
New vehicle management features let you create car profiles, assign multiple devices, and add vehicle photos for easier organization.
Improved multi-device handling, firmware update workflows, and config syncing reliability.
Also includes better support for older devices, improved background image handling, factory config reset support, and other minor fixes. 1.54 (154) Jun 6 Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023
GaugeControl version 1.58
Updated At: 2026-09-10
Changes: Version History Minor fixes :
MoTeC M800 oil pressure scaling
Water Pressure support for Link ECUs
Fuel level byte offset corrected for Link ECUs 1.58 4d ago Firmware 0.157 : MoTeC M800 Protocol fixes 1.57 (157) Jun 11 Added support for the new Turbo Speed gauge and expanded R32 compatibility, including R32 Skyline Clock support.
New vehicle management features let you create car profiles, assign multiple devices, and add vehicle photos for easier organization.
Improved multi-device handling, firmware update workflows, and config syncing reliability.
Also includes better support for older devices, improved background image handling, factory config reset support, and other minor fixes. 1.54 (154) Jun 6 Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023
GaugeControl version 1.57 (157)
Updated At: 2026-09-03
Changes: Version History Firmware 0.157 : MoTeC M800 Protocol fixes 1.57 (157) Jun 11 Added support for the new Turbo Speed gauge and expanded R32 compatibility, including R32 Skyline Clock support.
New vehicle management features let you create car profiles, assign multiple devices, and add vehicle photos for easier organization.
Improved multi-device handling, firmware update workflows, and config syncing reliability.
Also includes better support for older devices, improved background image handling, factory config reset support, and other minor fixes. 1.54 (154) Jun 6 Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023 Firmware 0.87: IOS17 Compatibility fix 1.03 (87) 10/01/2023
GaugeControl version 1.50 (150)
Updated At: 2026-05-28
Changes: Version History Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023 Firmware 0.87: IOS17 Compatibility fix 1.03 (87) 10/01/2023 Firmware 0.86
* Minor Link ECU bugfixes 1.02 (86) 09/20/2023 Minor bugfixes, customizable CANBUS pin mapping. 1.01 (85) 09/13/2023
GaugeControl version 1.50 (150)
Updated At: 2025-10-24
Changes: Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :)
GaugeControl version 1.48 (148)
Updated At: 2025-08-25
Changes: Aug 25, 2025
Version 1.48 (148)
MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID.
GaugeControl version 1.41 (141)
Updated At: 2025-07-07
Changes: Jul 7, 2025
Version 1.41 (141)
Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements.
GaugeControl version 1.38 (138)
Updated At: 2025-05-30
Changes: May 30, 2025
Version 1.38 (138)
Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection.
GaugeControl version 1.37 (137)
Updated At: 2025-04-23
Changes: Apr 23, 2025
Version 1.37 (137)
Z32 Fairlady Z appearance
Various firmware updates and bugfixes
GaugeControl version 1.36 (136)
Updated At: 2025-04-12
Changes: Apr 12, 2025
Version 1.36 (136)
Minor bugfixes, firmware version 0.136
Disclaimer
Official App Store Link
We do not host GaugeControl on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for GaugeControl is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
